Comprehensive methods for measuring regional multidimensional development and their applications in China   总被引：3，自引：3，他引：0  

Yong Xu  Jian Duan  Xiaoren Xu 《地理学报(英文版)》2018,28(8):1182-1196

National and international research on regional development has matured from the use of single elements and indicators to the application of comprehensive multi-element and multi-indicator measures. We selected 12 indicators from six dimensions for analysis in this study, including income, consumption, education, population urbanization, traffic, and indoor living facilities. We then proposed the polyhedron method to comprehensively measure levels of regional multidimensional development. We also enhanced the polygon and vector sum methods to render them more suitable for studying the status of regional multidimensional development. Finally, we measured levels of regional multidimensional development at county, city, and provincial scales across China and analyzed spatial differences using the three methods above and the weighted sum method applied widely. The results of this study reveal the presence of remarkable regional differences at the county scale across China in terms of single and multidimensional levels of regional development. Analyses show that values of the regional multidimensional development index (RMDI) are high in eastern coastal areas, intermediate in the midlands and in northern border regions, and low in the southwest and in western border regions. Districts characterized by enhanced and the highest levels of this index are distributed in eastern coastal areas, including cities in central and western regions, as well as areas characterized by the development of energy and mineral resources. The regional distribution of reduced and the lowest levels of this index is consistent with concentrations of areas that have always been impoverished. Correlation analyses of the results generated by the four methods at provincial, city, and county scales show that all are equivalent in practical application and can be used to generate satisfactory measures for regional multidimensional development. Additional correlation analyses between RMDI values calculated using the polyhedron method and per capita gross domestic product (GDP) demonstrate that the latter is not a meaningful proxy for the level of regional multidimensional development.  相似文献   

The Linear Coregionalization Model and the Product–Sum Space–Time Variogram     

S. De Iaco  D. E. Myers  D. Posa 《Mathematical Geology》2003,35(1):25-38

The product covariance model, the product–sum covariance model, and the integrated product and integrated product–sum models have the advantage of being easily fitted by the use of marginal variograms. These models and the use of the marginals are described in a series of papers by De Iaco, Myers, and Posa. Such models allow not only estimating values at nondata locations but also prediction in future times, hence, they are useful for analyzing air pollution data, meteorological data, or ground water data. These three kinds of data are nearly always multivariate and because the processes determining the deposition or dynamics will affect all variates, a multivariate approach is desirable. It is shown that the use of marginal variograms for space–time modeling can be extended to the multivariate case and in particular to the use of the Linear Coregionalization Model (LCM) for cokriging in space–time. An application to an environmental data set is given.  相似文献   

一次范数最小估计的无偏性   总被引：5，自引：0，他引：5  

周世健 《测绘学院学报》1998,(4)

理论上一次范数最小 ( L1 )估计的唯一性不存在 ,其唯一性主要取决于解算方法 ,大量算例验证其唯一性存在。本文作者基于算法来保证其唯一性 ,进而首次从理论上验证 L1估计的无偏性。利用初始反对称估计 ,设计了两个等价的线性规划问题 ,由此来解算得到 L1估计 ,根据误差分布为对称分布 ,便可证明 L1 估计的无偏性  相似文献   

测量极值问题的经验解式--兼论绝对和极小问题   总被引：4，自引：0，他引：4  

周江文 《测绘学报》1999,28(1):11-14

测量上有许多极值问题,如各种准则下的平差,权的最优分配,网的优化方案等,多可归于线性极值问题,且多不适用寻常数学解法。但同型问题往往已经作过多次解算。因此本文以单纯形法为主,强调利用已有经验,直接逼近优解,或经少数次迭进达到优解,然后极值条件加以验证。为此文中着重提出通用解式及优解条件,期能得出优解公式,有相当的适用范围。  相似文献   

数据采集中特征点粗差定位方法的探讨     

程朋根  曾秋荣 《华东地质学院学报》1997,20(1):39-47

本文分析了特征点应满足的几种条件，给出了一次范围最小（Ｌ１）法，最小二乘法以及粗差探测法进行特征点粗差定位方法，并以模拟实例为例对它们进行了比较，得出了一些有意义的结论。  相似文献   

软土地基沉降计算的误差分析   总被引：2，自引：0，他引：2  

杨克志  仇寅生 《安徽地质》2002,12(4):313-315

对引起路堤荷载下软土地基沉降从竖应力、固结沉降、瞬时沉降和后期沉降的计算四个方面,常见计算方法误差的诸多因素,从受力、沉降原理上进行了详细分析并提出一些建议,以使沉降更为接近实际.  相似文献   

Bond—Valence Sum and Distortion of Coordination Polyhedra     

章礼明 《中国地球化学学报》1993,12(1):92-96

By using the Lagrange‘s intermediate value theorem,it is derived mathematically that the structur-al distortion of a coordination polyhedron may lead to an increase in bond-valence sum of the cen-tral atom of ion .The applicabilities of the bond-valence model are discussed in the following two cases:the modeling of crystal structure ,and the indication of distortion degree of a coordination polyhedron.Also it is shown that a distorted polyhedron should be in favor of a longer average bond length or a smaller coordination number.  相似文献   

国家级数值预报产品分发系统          下载免费PDF全文

相秀珍 《气象》1997,23(8):21-24

随着９２１０工程系统建设的完成，Ｔ１０６中期数值预报产品分发采用了地面通信系统和卫星通信系统两种传输路径。地面通信系统由于受传输能力限制，国家气象中心根据区域、省，地市级的不同接收能力，采取了３种不同的传输方式以满足各级气象台站的需求；  相似文献   

基于聚类分析的边坡稳定性研究     

秦雨樵  汤华  冯振洋  尹小涛  王东英 《岩土力学》2018,39(8):2977-2983

在边坡稳定性分析中,滑面搜索方法对于得到边坡的稳定性系数至关重要。现今两种常用的边坡稳定性分析方法,极限平衡法以及强度折减法,可以得到极限应力状态下边坡的潜在滑面。而为了评价边坡在当前应力场下的稳定性,提出一种基于聚类分析概念的滑面搜索方法。这种方法综合考虑了边坡各点的位移以及点安全系数,采用K均值聚类法将具有相近性质的点进行分类,把边坡体分为潜在危险区以及稳定区。潜在危险区的边界即为边坡在当前应力状态下的潜在滑面,并运用矢量和方法计算得到其稳定性系数。采用上述方法对3个算例进行验算,并与极限平衡法以及强度折减法进行对比。结果表明：（1）基于聚类分析的边坡稳定性评价方法具有较好的合理性和可靠性;（2）当边坡处于临界状态附近,通过聚类分析得到的潜在滑面与其他两种方法得到的滑面基本一致;当边坡处于较稳定状态时,当前应力状态下的潜在滑面要比强度折减法得到的滑动带范围要更深更广,但求出的稳定性系数也较高;当存在软弱夹层时,矢量和计算出的滑面更为陡峻,稳定性系数比其他两种方法的结果要小。  相似文献   

考虑超随机特性的人工地震动合成   总被引：5，自引：5，他引：0  

徐国栋  周锡元  闫维明  董娣 《地震工程与工程振动》2005,25(4):11-17

文中根据自相关函数随机噪声部分的2个重要性质提出了自相关函数随机噪声部分的迭代生成算法,并给出了以确定性自相关函数为目标函数,考虑随机噪声部分影响的人工合成地震动方法.本文的研究结果表明地震动加速度的平方和（SS）比峰值加速度（PGA）更好地量度了地震地面运动强度.文中用蒙特卡罗方法分析了自相关函数噪声项对人工合成地震动幅值和反应谱的影响：由于自相关函数的随机噪声项对地震动总功率或平方和的贡献为0,因此随机噪声项对合成地震动幅值的影响不大,但由于自相关函数随机噪声项明显改变了地震动功率谱在频域上的分布特征,使原本光滑的平均反应谱出现了明显的波动,从而在一定程度上提高了平均反应谱的峰值,使自相关函数噪声部分对平均反应谱也有一些影响.  相似文献